Skip to content
TruckSwing

Box truck roll up door: how it works, what breaks and what a new one costs

By Ryan, TruckSwing dispatch desk · Updated

ROLL-UP DOOR PARTS, PRICED

EX-RD
96 x 100 in door, wood panels$868.75
96 x 100 in door, steel composite$1,059.84
Counterbalance assembly, 92-96 in$317.95
Bottom panel with seal$127.95
Door + spring, wood, parts only$1,186.70
EXAMPLE

The rear door is the part of a box truck you use more than the engine on a delivery day. A 26 ft truck on a multi-stop route can open and close it dozens of times a shift, in rain, cold and dust, often with a heavy hand. When it fails, the truck cannot deliver: a door that will not open strands the freight, and one that will not lock is a cargo claim waiting to happen. This guide explains how the door works, the common failures and what fixes them, a maintenance routine, and what box truck roll up door parts and a full replacement cost, using parts prices we checked in October 2026.

How a box truck roll up door works

A roll up door for box truck bodies is a stack of horizontal panels joined by hinges. Each hinge carries a roller at its ends, and the rollers ride in two tracks, one on each side of the opening. The tracks run up the door frame and curve back under the roof, so the door rolls up and lies flat inside the box when open.

Above the opening sits the counterbalance: a steel shaft with one or two torsion springs and a cable drum at each end. Cables run from the drums to the bottom of the door. When you lift, the springs unwind and do most of the work; when you pull the door down, they wind up again. That is why a healthy door lifts with one hand and a door with a broken spring will not lift at all.

The rest of the parts:

  • Panels: usually wood (hardwood-faced plywood), aluminum or steel composite.
  • Seals: top, bottom and side seals keep rain and dust out.
  • Lock and catch plate: a latch at the bottom that engages a plate on the floor.
  • Pull strap and lift handle: for reaching the door when it is up.

Roll up box truck door vs swing doors

A roll up box truck door opens without swinging out, so the driver can open it at a tight dock or a curb with a car parked behind. The trade-off is height: the door and its spring sit inside the top of the opening. U-Haul lists its 26 ft truck at 8 ft 3 in tall inside with a rear door opening 6 ft 10 in high, a gap that matters for tall freight.

SOURCE:U-Haul, truck spec page (Sept 2026), OCT 2026

Swing doors open to nearly the full box size and seal tightly, but need room behind the truck and must be latched open. Our box truck with side door guide compares rear door types and openings in detail.

Box truck roll up door repair: six common problems

SymptomLikely causeFixDIY or shop
Door is heavy or will not stay upSpring has lost tension or a spring has brokenRe-tension or replace the counterbalanceShop: springs are under high tension
Door drops or slamsBroken spring, or a cable off its drum or snappedReplace spring or cable, re-tensionShop
Door jams or binds partwayBent track, worn or broken roller, debris in the trackClean track, replace rollers, straighten or replace trackDIY for rollers and cleaning; shop for bent track
Door hangs crookedOne cable slipped or stretched, or a hinge brokeReset or replace the cable, replace the hingeShop for cables, DIY for a hinge
Water or dust insideWorn top, bottom or side sealsReplace sealsDIY
Cracked, split or soft panelImpact damage or water in a wood panelReplace the panelDIY with the door down

A safety rule above all others: the counterbalance spring stores a lot of energy. Releasing, winding or replacing it without the right tools and training can cause serious injury. Leave spring and cable work to a truck body shop or a trained technician.

Roll up door box truck jams: what to check first

Most jams are simple. With the door down and the truck parked, look along both tracks for debris, a bent section or a missing bolt. Run the door slowly and watch each roller: one that wobbles, squeals or does not turn needs replacing. Check that both cables are wound evenly on their drums. If the door only binds at the top, the curved section of track or the spring tension is usually the cause.

Box truck roll up door panels and panel replacement

Panels take the hits: forklifts, pallets, a load shifting into the door. A cracked or broken panel weakens the door and lets weather in. Panel replacement is often a job you can do yourself, because panels are riveted or bolted to the hinges and can be swapped with the door closed and the spring untouched.

Before ordering, measure the panel width and height, note whether it is a top, middle or bottom panel, and check the joint type (most are tongue and groove). EXAMPLE price from one parts supplier in October 2026: an 11 x 95.75 inch bottom panel for Todco, Diamond and Whiting style doors, with its bottom seal and retainer, listed at $127.95.

SOURCE:Mill Supply, 11 x 95.75 in bottom roll-up door panel (SKU LBP-11-96), OCT 2026

Replace a panel before the damage spreads: a split wood panel soaks up water, swells and starts to bind in the track.

Box truck roll up door replacement cost

When the panels, tracks and spring are all worn, a full box truck roll up door replacement makes more sense than patching. Parts prices from one supplier's listings, checked October 2026:

PartSize / fitPriceNot included
Replacement door, wood panels (Todco style)96 x 100 in$868.75Counterbalance, track, side seals
Replacement door, galvanized steel composite (universal)96 x 100 in, cuts down to 92 x 94 in$1,059.84Counterbalance, track, side seals
Counterbalance assembly (Whiting 2376 style)92 to 96 in wide, 100 in tall doors$317.95Mounting work
Bottom panel with seal11 x 95.75 in$127.95Labor

SOURCE:Mill Supply, 96 x 100 in replacement door for Todco style roll-up door (SKU 20-7082), OCT 2026;Mill Supply, 96 x 100 in universal Mill Evolution replacement roll-up door (SKU 20-8026), OCT 2026;Mill Supply, 95 in counterbalance assembly for Whiting 2376 style doors (SKU 20-7098), OCT 2026;Mill Supply, 11 x 95.75 in bottom roll-up door panel (SKU LBP-11-96), OCT 2026

EXAMPLE: a wood-panel door and a new counterbalance come to $868.75 + $317.95 = $1,186.70 in parts. The steel composite door with the same spring comes to $1,059.84 + $317.95 = $1,377.79. Add new track if yours is bent, side seals, freight shipping (full doors ship by freight, not parcel), and shop labor. Labor is quoted per job and varies by shop and region, so we do not print a number for it.

EXAMPLE

How to keep the box truck roll up door repair cost down:

  1. Get the exact size first. Width, height and panel thickness, plus any tag on the door or spring.
  2. Ask for two quotes with parts and labor listed separately.
  3. Ask whether the track and spring can be reused. A straight track and a spring that holds tension do not need replacing with the door.
  4. Ask about downtime. A shop that has the door in stock may beat a cheaper one that has to order it.

Roll-up door maintenance routine

Maker manuals set the exact intervals and lubricants for each door; follow yours. A routine that fits most delivery trucks:

  • Every pre-trip: open and close the door fully. Listen for grinding, look for a crooked door, and check that the lock engages.
  • Weekly on busy routes: wipe debris out of the tracks and check the bottom seal.
  • Monthly or at service intervals: check rollers for wear, hinges for cracks and loose rivets, cables for fraying, and lubricate the points the manual names.
  • At the annual inspection: have the spring and cables looked at by the shop, along with seals and the lock.

Federal rules require carriers to systematically inspect, repair and maintain their vehicles and keep records for each one. A door is part of that record: log the date and what was done. Our box truck repair guide covers the rest of the schedule.

SOURCE:eCFR, 49 CFR 396.3, OCT 2026

When to call a body shop

  • Any spring or cable work.
  • A bent or torn track.
  • A door that will not stay up or comes down hard.
  • Damage to the door frame or the box around the opening.
  • A full door swap, unless you have done one before and have the tools.

Body shops that work on box trucks usually stock common box truck roll up doors and parts and can tell you on the phone whether your door is a standard size. Before you drive the truck there, secure the door closed and remove any freight you can.

Keeping the truck earning while the door is down

A broken door is usually a one-day problem if you plan it. Book the shop for the first slot, schedule light work around it, and have a spare lock and strap in the truck. For 26 ft and larger box trucks, our truck dispatch service books loads around shop days so a repair does not turn into a lost week. More on how the desk works is on our box truck dispatch page.

SOURCE:Mill Supply, 96 x 100 in replacement door for Todco style roll-up door (SKU 20-7082), OCT 2026;Mill Supply, 96 x 100 in universal Mill Evolution replacement roll-up door (SKU 20-8026), OCT 2026;Mill Supply, 95 in counterbalance assembly for Whiting 2376 style doors (SKU 20-7098), OCT 2026;Mill Supply, 11 x 95.75 in bottom roll-up door panel (SKU LBP-11-96), OCT 2026;U-Haul, truck spec page (Sept 2026), OCT 2026;eCFR, 49 CFR 396.3, OCT 2026

Box truck roll up door questions

Q-01How much is box truck roll up door repair?

It depends on the part. A single bottom panel listed at $127.95 and a full counterbalance spring assembly at $317.95 from one parts supplier in October 2026, before shipping and labor. Roller, seal and cable jobs cost less in parts. Shop labor is quoted per job, so get two quotes and ask each shop to list parts and hours separately.

Q-02Can I replace box truck roll up door panels myself?

Often, yes, if the counterbalance spring is left alone. Panels are hinged together and riveted or bolted, so a damaged panel can be swapped with the door down and the spring tension unchanged. Measure the panel width, height and joint type first. Anything that needs the spring released or rewound belongs with a trained technician.

Q-03Why does my roll up door fall or slam shut?

A door that drops, slams or will not stay open usually has lost spring tension, a broken spring or a cable off its drum. All three mean the counterbalance is no longer carrying the door's weight. Stop using it, keep people clear of the opening, and have the spring checked; a falling door can injure whoever is under it.

Q-04Where do you buy box truck roll up door parts?

From truck body parts suppliers, the body builder's parts department and truck body shops. Have the door's make, width, height and panel thickness ready, plus any serial or model tag on the door or counterbalance. Suppliers match springs by door size and weight, so a wrong guess wastes a freight shipment.

Q-05Is a roll up door or swing door better on a box truck?

A roll up door opens without swinging out, so it works at tight docks and curbs, but the rolled door and its spring take some height at the top of the opening. Swing doors open almost the full box size and seal tightly, but need room behind the truck. Delivery work favors roll-up; tall freight favors swing.

Ryan, TruckSwing dispatch desk

UPDATED OCTOBER 2026 · EDITORIAL POLICY